Android Eduroam Manual Setup

THIS METHOD OF AUTHENTICATION IS ONLY RECOMMENDED IN EXTREME CASES.  EDUROAM MUST BE SETUP USING THE AUTOCONFIG METHOD.

 
*Note: If you have connected to Eduroam in the past you will need to forget the network first*
 
Step 1. Open your wifi settings and select “Eduroam” from your list of networks.
 
Step 2. Enter the following information: 

 
  • Security type: 802.1x EAP
  • EAP Method: PEAP
  • Phase 2 Authentication: MSCHAPV2
  • CA Certificate: (Leave blank if present) or “Do not validate”
  • User Certificate: (Leave blank if present)
  • Identity: Gatorlinkusername@ufl.edu
    • *Note: Identity must be in the format GatorLink@ufl.edu or Username@shands.ufl.edu, aliases cannot be used*
  • Anonymous Identity: (leave blank if present)
  • Password: gatorlink password
  •  

Step 7. The first time you connect you may be asked to accept to trust the AddTrust root certificate. Accept the certificate and complete the connection.

 
You should now be connected!